Zenoah TWIN GT80 Instruction Manual download pdf (Page 23)

23

Step 9. Center the wheels in the wheel pants and tighten the

collars against the wheels so that they are held in place. Use

Blue Locktite

®

on the collar set screws.

Step 10. Remove the landing gear fairing by removing the

nylon set screw and mount the landing gear to the fuselage using

four 10–32 x 1" screws and locking nuts.

Section 8: Installing the Landing Gear

CONTINUED

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 39 40

Comments to this Manuals

No comments