Zenoah TWIN GT80 Instruction Manual download pdf (Page 26)

Step 3. Using foam and rubber bands (or Velcro

straps),

securely attach the battery to the battery tray.

Step 4. The gas tank mounts just ahead of the wing tube close

to the center of gravity. Assemble the tank per the instructions

included with the tank. Be sure to use a gas-compatible stopper

and fuel tubing.

Step 5. Place foam on the floor of the tank compartment. Secure

the tank in place by wrapping rubber bands or Velcro

straps

around the tank and tank floor. Cup hooks can be used to hook

the rubber bands to the tank floor. Later we will run the fuel lines.

Reinstall the landing gear fairing at this time.

Step 6. Using 6-minute epoxy, fasten the receiver mount in

place as shown.

Step 7. Using foam and rubber bands (or Velcro

straps),

fasten the receiver in place as shown.

Step 8. Mount the receiver switch in a convenient location in

the side of the fuselage.

Section 10: Installing the Receiver, Battery,

and Fuel Tank

CONTINUED

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 39 40

No comments

Zenoah TWIN GT80 Instruction Manual Page 26