Zenoah TWIN GT80 Instruction Manual download pdf (Page 25)

Step 1. Using the included templates on the back cover of the

manual, cut out the receiver and battery trays from

/8" light

plywood (not included).

Step 2. If using the Zenoah GT-80, it will be necessary to

mount the battery pack slightly behind the wing’s trailing edge to

properly balance the model. The lighter weight Zenoah G-62

requires that the battery be mounted in the nose. Using

6-minute epoxy, attach the battery tray in the fuselage in the

front or rear position.

The battery tray is rear mounted for the Zenoah GT-80 or other twin

engines.

The tray is mounted in front for the Zenoah G-62 and other

lightweight engines.

Section 10: Installing the Receiver, Battery,

and Fuel Tank

• Fuselage

Included in Optional Hangar 9 Hardware Package

• 32 oz fuel tank

Not Included

• Receiver

• 1000mAh or larger battery pack

• Receiver switch

•

/8" light plywood

• Radio mounting foam (thick gyro tape also works well)

• Cup hooks

• Rubber bands #64

• Saw (to cut plywood)

• 5-minute epoxy

Parts Needed Tools and Adhesives Needed

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 39 40

No comments

Zenoah TWIN GT80 Instruction Manual Page 25