Zenoah G290PUM User Manual

Arrow Shark TS760-Marine Onboard E-Starter Owner Manual The TS760-Marine Onboard E-Starter has concluded years of experience Arrow Shark has on RC bo

Installation of TS760-Marine to CY engine Although the TS760-Marine onboard E-starter could directly bolt on to most brand of marine gas engines that

flywheel on CY engine because the magnetic timing on the CY flywheel is not comparable with Zenoah engine that will make engine not able to start. Spa

The belt in the TS760-Marine needs to be greased as well in order to reduce the drag with the stainless steel cover stands. One Way Bearing Changi

When starting a warm engine, you don’t need to close the choke; just simply press on the power switch for less than 3 seconds and the engine will star

Part List Part Number Description Part Number Description #1 R-One Remote Device #16 Stainless Steel Standsx4 #2 Billet Gear Box #17 M4x40 Bol

R-One Remote Device Set Up Very Important Notes #1: Never suddenly stop your engine at high speed, this will definitely hurt the one way bearing in

“Left Forward” Setting Go to the “End Point Adjustment” (EPA) in your transmitter, and select the Third Channel. Adjust the “Left Forward” to the

Adjustment”, then click on the third channel switch to move the radio to the “Right Forward” setting. Adjust that to 0% which will enable you to turn

Tool Request #1: 14mm Wrench #2: 3mm Socket Hex Wrench #3: 4mm Socket Hex Wrench (Short Head) #4: 5mm Socket Hex Wrench The engine in the below

#3: Install the billet flywheel adaptor (Part#6) onto flywheel and tighten it with supply bolts (Part#27). #4: Install the back engine mount back on

Wire Connection Diagram You need to provide a Three Channel Transmitter and a Three Channel Receiver for the R-One remote device; any FM or 2.4GHz ra

#1: Unscrew the belt wheel cover. #2: Loosen the motor bolts, and take out the belt. #3: Release the clip from the gear shaft. #4: Unscrew the b