Zenoah BCZ2602DL Owner's Manual download pdf (Page 7)

GB-7

G

B

BCZ2602DL

could result in serious burns or elec-

trical shock.

• IF SOMEONE COMES

1. Guard against hazardous situa-

tions at all times. Warn adults to

keep pets and children away from

the area. Be careful if you are ap-

proached. Injury may result from

flying debris.

2. If someone calls out or otherwise

interrupts you while working, al-

ways be sure to turn off the en-

gine before turning around.

MAINTENANCE

1. In order to maintain your product

in proper working order, perform

the maintenance and checking

operations described in the

manual at regular intervals.

2. Always be sure to turn off the en-

gine before performing any main-

tenance or checking procedures.

WARNING

The metallic parts reach high tem-

peratures immediately after stop-

ping the engine.

3. When replacing the cutting at-

tachment or any other part, or

when replacing the oil or any lu-

bricant, always be sure to use

only KOMATSU ZENOAH prod-

ucts or products which have

been certified by KOMATSU

ZENOAH for use with the

KOMATSU ZENOAH product.

4. In the event that any part must be

replaced or any maintenance or

repair work not described in this

manual must be performed,

please contact a representative

from the store nearest KOMATSU

ZENOAH authorized servicing

dealer for assistance.

5. Do not use any accessory or at-

tachment other than those bear-

ing the KOMATSU ZENOAH mark

and recommended for the unit.

6. Under no circumstances should

you ever take apart the product

or alter it in any way. Doing so

might result in the product be-

coming damaged during opera-

tion or the product becoming un-

able to operate properly.

HANDLING FUEL

1. The engine of the KOMATSU

ZENOAH product is designed to

run on a mixed fuel, which con-

tains highly flammable gasoline.

Never store cans of fuel or refill

the tank of the unit in any place

where there is a boiler, stove,

wood fire, electrical sparks, weld-

ing sparks, or any other source

of heat or fire which might ignite

the fuel.

2. Never smoke while operating the

unit or refilling its fuel tank.

3. When refilling the tank, always

turn off the engine and allow it to

cool down. Take a careful look

around to make sure that there are

no sparks or open flames any-

where nearby before refueling.

4. Wipe spilled fuel completely us-

ing a dry rag if any fuel spillage

occurs during refueling.

5. After refueling, screw the fuel cap

back tightly onto the fuel tank and

then carry the unit to a spot 3 m

or more away from where it was

refueled before turning on the en-

gine.

TRANSPORTATION

1. When hand-carrying the product,

cover over the cutting part if nec-

essary, lift up the product and

carry it paying attention to the

blade.

2. Never transport the product over

rough roads over long distances

by vehicle without removing all

fuel from the fuel tank. If doing so,

fuel might leak from the tank dur-

ing transport.

5. For safe operation

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Comments to this Manuals

No comments