GB-1GBPSZ2600PSZ2600GBOWNER’S MANUALPOLE SAW115 37 31-10 (005)Original Language
GB-10PSZ26008. Operation6. While holding the unit firmly, pull out the starter rope quicklyuntil engine fires. WARNINGThe product is equipped with a c
GB-11GBPSZ26008. OperationChecking oil supplyAfter starting the engine, run the chain at medium speed andsee if chain oil has scattered off, as shown
GB-12PSZ26009. MaintenanceTIGHTENING TORQUE:9.8 - 11.8 N.m.(1 - 1.2 kg.m.) WARNING• Make sure that the engine has stopped and is cool be-fore perfor
GB-13GBPSZ26009. MaintenanceSPARK ARRESTER• The muffler is equipped with a spark arrester to prevent redhot carbon from flying out of the exhaust outl
GB-14PSZ26009. Maintenance0.3 mmSPROCKETCheck for extensive wear, and replace it when the teeth areworn over 0.3 mm.(1) SprocketSAW CHAIN WARNINGIt is
GB-15GBPSZ260011. Disposal• When you dispose of the machine, do not disassemble themachine.• When you dispose of the machine, fuel, oil, be sure to f
GB-16PSZ2600To Dealer: Please complete the following form at time of sale.Product Model:ZENOAHPSZ2600Equipment No.:Engine No.:Date of Purchase: D / M
GB-2PSZ2600This pole-mounted powered pruner (hereafter called pruner) is designed especially for tree service by atrained operator. For safe operation
GB-3GBPSZ26002. Specification3. Warning labels on the machineNever modify your machine.We won’t warrant the machine, if you use theremodeled pruner or
GB-4PSZ2600 5. For safe operation1. Read this manual carefully until youcompletely understand and followall safety and operating instructions.2.Keep t
GB-5GBPSZ2600 5. For safe operation IMPORTANTRemove any obstacle before beginningwork.4. Inspect the entire unit for loose fas-teners and fuel leakage
GB-6PSZ2600 5. For safe operationHANDLING FUEL1. The engine of the ZENOAH productis designed to run on a mixed fuel,which contains highly flammablegas
GB-7GBPSZ26006. Set up(1) Chain tension adjusterscrew(a) Loosen(b) TightenMOUNTING ENGINE1. Push the shaft tube toward the clutch housing and rotate i
GB-8PSZ2600(1)(Single harness)6. Set up 7. Fuel and chain oil(1) Tighten5. Tighten the mounting nut securely with the bar tip held up(TORQUE: 8.9 - 11
GB-9GBPSZ26007. Fuel and chain oil 8. Operation(1) Stop switch123(1) WARNINGThe cutting head will start rotating upon the engine starts.1. Feed fuel i
Comments to this Manuals