Zenoah HBZ2601 User Manual Page 11

  • Download
  • Add to my manuals
  • Print
  • Page
    / 16
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 10
GB-11
G
B
HB2302 / HBZ2601
WARNING
Make sure that the engine has stopped and is
cool before performing any service to the
blower. Contact with rotating blower fan or hot
muffler may result in a personal injury.
AIR CLEANER
Never operate the blower without an air filter or with a
deformed or broken filter element.
Check the air cleaner before use.
A clogged air filter may increase fuel consumption
while cutting down the engine power. Never operate
the blower without the air filter or with a deformed fil-
ter element because unfiltered dusty air will quickly
ruin the engine.
CLEANING AIR FILTER:
[HB2302]
1. Remove the air cleaner cover by pushing and pulling
back the tab on the top.
2. Use neutral detergent and warm water to clean the
filter element. After cleaning, air dry the element com-
pletely.
3. Install the filter element into the air cleaner housing
and press the cover against the housing until clicks.
If the element is broken or shrunk, replace with a new
one.
9. Maintenance
Maintenance, replacement, or repair of the emission control device and systems may be per-
formed by any non-road engine repair establishment or individual.
Daily Every Every Every
System / Compronent Procedure or 25 hours 50 hours 100 hours
Before use after after after
Air Filter Prefilter Inspect / Clean
Air Filter Paper Filter Inspect / Replace
Fuel Leaks Inspect / Replace
Fuel Filter Inspect / Replace ✔✔
Fuel Line Inspect / Clean
Spark Plug Inspect / Clean
Muffler Inspect / Clean
Muffler Spark Arrester Inspect / Clean
Cooling Systrem Inspect / Clean
Screws / Nuts / Bolts Tighten
Cylinder Exhaust Port Inspect / Clean
[HBZ2601]
1. Remove the air cleaner cover.
2. Use neutral detergent and warm water to clean the
filter element. After cleaning, air dry the element com-
pletely.
3. Reinstall the filter. Never forget to attach the screen. If
the screen is not attached, the cleaner will not seal
properly and the dusts come into the cylinder.
(1) Element
(2) Screen
Page view 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments